A LoRa radio node supplied by Dani. Consists of two boards which can be soldered together directly: An nRF52840 board, in nice!nano / promicro format, and an SX1262 board with two buttons.

• https://github.com/joric/nrfmicro/wiki/Alternatives
• https://github.com/NomDeTom/NiceRa/tree/main/Sidekick%20Breakout%20V2.1

Flashing can be done by dragging a .uf2 file to the drive that appears on USB connection. However, this did not work for me initially. Bootloader was version 0.6.0. I upgraded this to 0.9.2 and then the latest meshtastic image was recognised and programmed.

Bootloader can be updated with serial dfu tool from adafruit, or by copying these files to the USB drive in this order:

• https://github.com/adafruit/Adafruit_nRF52_Bootloader/releases/download/0.9.2/nice_nano_bootloader-0.9.2_s140_6.1.1.hex
• https://github.com/adafruit/Adafruit_nRF52_Bootloader/releases/download/0.9.2/update-nice_nano_bootloader-0.9.2_nosd.uf2

Firmware image is called: “NRF52 Pro-micro DIY”, available on the github releases page.

I measured when running meshtastic 2.6.11 from supplied image, LEDs disabled, not transmitting.

Supplied on battery terminals:

• 3.32V: 8.7mA
• 4.20V: 7.9mA

3.3V to 3.3V pin on board: 8.6 mA.

5V supplied on USB port: Between 9.5mA and 10.0mA. Seems to vary. Blue LED flashes rapidly.

Current draw reduces by about 600uA from these numbers when connected to phone by bluetooth, which happened about 35 seconds after power on.