Differences

This shows you the differences between two versions of the page.

--- dylos_dc1700 [2024/11/10 07:36] – river
+++ dylos_dc1700 [2024/11/24 21:24] (current) – river
@@ Line 4: / Line 4: @@
 {{ :dc1700.pdf | Manual}}
+DC power input 12V centre positive. With added ESP8266, draws about 300mA peak on start, then 200mA steady. The board gets pretty warm for some reason.
+Clock battery: CR1220s 3V.
+====== Modifications ======
+I have modified the one I had. When I got it, it was already a bit broken. Fan disconnected and no main battery. I replaced the fan. I added an ESP8266, which is connected to the UART output of the PIC to read the measurements. I didn't connect a line the other way. I expect it will need to be calibrated for the new fan and changed wiring / battery removal etc. as it will have affected the airflow.
+The external serial port is not connected to anything.
 ===== Serial Connection =====
@@ Line 16: / Line 26: @@
 would mean the average concentration over the past minute
 was 67,500 particles per cubic foot." (manual)