decagon-mps-6
This is an old revision of the document!
Table of Contents
Decagon MPS-6 Water Potential Sensor
I have a couple of these.
Wire
- Shield / Bare: Ground
- White: Power, 3.6V to 15V
- Red: Signal
Serial Protocol
- Serial (UART) or SDI-12.
- 1200 baud, 8N1.
- 0 - 3.6V levels, active low
- Sends a reading automatically ~40mS after power applied.
Data format:
<water potential in kilopascals> <temperature in C>\r
decagon-mps-6.1714025865.txt.gz · Last modified: 2024/04/25 06:17 by river